Taking a computer into a Grade A or B cleanroom is very different from putting one on an office desk. Every surface is a potential contamination risk, every cleaning cycle tests the materials, and every record it creates has to stand up to an audit. Here’s what to look for when choosing a tablet or HMI for GMP cleanroom areas.
A quick recap: GMP cleanroom grades
EU GMP Annex 1 defines four cleanroom grades for sterile manufacturing:
- Grade A: the critical zone for high-risk operations such as aseptic filling. Air cleanliness equivalent to ISO 5, both at rest and in operation.
- Grade B: the background environment for Grade A. ISO 5 at rest, ISO 7 in operation.
- Grade C and D: cleanrooms for less critical stages of manufacture, typically ISO 7 to ISO 8.
The higher the grade, the stricter the expectations for anything that enters the room, including IT equipment.
1. A surface designed to be cleaned
Standard tablets and panel PCs are full of gaps, seams, vents and screw heads, all of which trap particles and residues. A cleanroom device should have:
- A smooth stainless steel housing with no welded seams, frames or crevices
- Bevelled edges so cleaning fluids run off rather than pooling
- No exposed screws or dead spaces where contamination can build up
2. No fans
A cooling fan pulls in air and blows it back out, disturbing laminar airflow and potentially spreading particles. GMP-grade devices use passive (fanless) cooling with no moving parts.
3. Resistance to your disinfectants
Cleanroom devices are wiped down many times a day with alcohols and other aggressive agents. Housing materials, seals and the display surface all need high chemical resistance, and seals should be low-emission. If you use a specialist agent, ask whether it has been tested. Our suppliers can arrange individual chemical-resistance tests with the Fraunhofer Institute.

4. Proper ingress protection
Look for IP69 on the housing. That means fully dust-tight and able to withstand high-pressure, high-temperature water jets. Ports should be sealed or protected, and covers over connection areas should be rated too.
5. Built-in, not bolted-on
Every external cable, dongle or reader adds a surface to clean and a seal to maintain. The best cleanroom devices integrate Wi-Fi, Bluetooth, the power supply and an RFID/NFC reader inside the housing, so there’s nothing hanging off the outside.
6. Works with gloves
Operators in Grade A/B areas wear sterile gloves, often double-gloved. A capacitive touchscreen needs to be tuned to work reliably through latex or nitrile gloves, ideally with adjustable sensitivity.
7. Independent evidence
Marketing claims are not the same as evidence. Ask for certification from an independent body that the device is suitable for the cleanroom grade you are using it in. Our CR series HMIs, for example, are certified by the Fraunhofer Institute for GMP Class A/B areas, giving your compliance team written proof for audits.

8. Support for data integrity
If the device creates GMP records, the software and set-up need to support EU GMP Annex 11 or FDA 21 CFR Part 11: unique user logins, audit trails and secure data. Hardware helps here too. An integrated RFID reader lets operators sign in with a badge instead of typing passwords with gloved hands.
9. The right mounting
A device is only as cleanable as the arm or bracket it’s mounted on. Choose hygienic mounting systems with screwless joints and sealed cable routing. If you already have support arms installed, adapters can let you reuse them.

Quick checklist
- Smooth, seamless stainless steel housing with no crevices
- Fanless, passive cooling
- High chemical resistance; testing available for special agents
- IP69 housing; sealed ports and covers
- Integrated Wi-Fi, Bluetooth, power supply and RFID
- Glove-compatible touchscreen
- Independent certification for the GMP grade
- Supports Annex 11 / Part 11 data integrity
- Hygienic mounting system
Find the right device for your cleanroom
We supply GMP cleanroom tablets, HMI panel PCs, keyboards and hygienic mounting systems for pharma, biotech, laboratories and food production. Explore our cleanroom solutions, see our cleanroom HMI workstations, or call us on 020 3751 4575.